|
Type
|
Characteristics |
General
usages |
Illustrations |
| JOHO-850 |
Rework
station
Input
voltage: AC 220V
Power
consumption: 270W
Pump
type: Diaphragm pump
Air
flow rate: 0.3-24L/min(Max), stepless speed regulation
Heater:
Metal, 250W
Hot
air temperature range:
100¡æ-420¡æ
¡¡
|
*
ESD safe and over current protection
*
Air flow and air temperature can be adjusted in a large
range.It is suitable for soldering QFP & SOP IC. Can be
change nozzle to suitable different type of SMD desoldering
work.
|
 ¡¡ |
|
|
|
JOHO-850B |
2 IN 1 Maintenance system - Rework
station + Soldering
Input
voltage: AC 220V
Power
consumption: 270W
Pump
type: Diaphragm pump
Air
flow rate: 0.3-24L/min(Max), stepless speed regulation
Heater:
Metal, 250W
Hot
air temperature range:
100¡æ-420¡æ
¡¡
Soldering
iron
Output
voltage: 24V
|
*
Can be used independently or simultaneously with function of
removing static electricity.
* Fit to be used for repair work of SMD circuit board for
mobile commun. maintenance
Multi-function anti-static electricity maintenance system
enables welding removing of flat IC saftly and effectively.
*
ESD safe and over current protection.
|
 ¡¡ |
|
| JOHO-850D |
Rework
station - Digital display and Microcomputer
Input
volt.: AC 220V¡À10%V
Power
consumption:
1.Heater:
Starting 540W(Max), operation: 320W
2.Air
pump power: 40W
Pump
type: Diaphragm pump
Heating
element: Metal,250W
Air
flow rate: 0.3-24L/min(Max), stepless speed regulation
Hot
air temperature range:
100¡æ-480¡æ
Temp.
display: 3 digits
Temp.
accurate: ¡À1¡æ
¡¡
*
ESD safe and over current protection.
|
*
A light touch switch to change the temperature preset
function / temperature measure display alternatively. The
preset temp value, measure temp value are display very
clearly.
* It has automatic energy saving mode. When press the preset
temperature on switch at the handle, the heater will be
power on and increase to the preset temp. To prevent the
heater waste the heat energy if not use. Increase the heater
core lifetime and energy saving. |
 ¡¡ |
|
| JOHO-853 |
Rework
station - Digital display
Input
volt.: AC 220V
Power
consumption: 270W
Pump
type: Diaphragm pump
Pump
power: 45W
Heating
element: Metal,250W
Air
flow rate: 0.3-24L/min(Max), stepless speed regulation
Hot
air temperature range:
150¡æ-500¡æ
Temp.
display: 3 digits
Temp.
accurate: ¡À1¡æ¡¡
|
*
ESD safe and over current protection.
*
A hot airflow rate display meter ensure the BGA IC soldering
or desoldering success.
* Automatic / Manual control mode, intelligent operate
setting.
* High precision digital thermostat design. To prevent
overheat damage the BGA IC.
* Automatic PID control mode. High precision thermostat ¡À1¡æ.
Keep a linear temperature thermostat control even changed
the airflow rate.
|
 ¡¡ |
|
| JOHO-936 |
Soldering
station
Output
voltage: 24V AC
Power
consumption: 60W
Temperature
range: 200-480
¡¡
Soldering
iron
Power
consumption: 24V AC-50W
Heating
element: Ceramic heater
|
-
Fast speed of temperature climbing
-
Constant temperature during operation
-
Easy to use
-
ESD safe and over current protection
|
 ¡¡ |
|
| JOHO-937 |
Microcomputer
control - Soldering
station
Output
voltage: 24V AC
Power
consumption: 60W
Temperature
range: 200-480
¡¡
Soldering
iron
Power
consumption: 24V AC-50W
Heating
element: Ceramic heater¡¡
|
* Control by CPU
* ESD safe and
over current protection
* Built-in
temperature sensor can keep the temp.
constant and
precision.
* Finger touch
type control switch ,fully digital the output and setup temp..
|
 |
|
¡¡
|
| NET-
850 |
Rework
station SPEC:
Input
voltage: AC 220V
Power
consumption: 270W
Pump
type: Diaphragm pump
Air
flow rate: 24L/min(Max)
Hot
air temperature range:
100¡æ-500¡æ
Functions:
*
Air flow and air temperature can be adjusted in a large
range.
*
Heater and nozzle meet with international standard.
|
*
Blow away heat automatically after soldering or desoldering
to extend life of heater and handle.
* Suitable for most of SMD soldering and desoldering such as
SOIC, CHIP, QFP, PLCC, BGA etc.
* Can be used to shrink tube.
*
ESD safe and over current protection.¡¡
|
 ¡¡ |
| ¡¡ |
| HUAKO-936 |
Soldering
station
Output
voltage: 24V AC
Power
consumption: 60W
Temperature
range: 200¡æ-480¡æ
¡¡
Soldering
iron
Power
consumption: 24V AC-50W
Heating
element: Ceramic heater
|
-
Fast speed of temperature climbing
-
Constant temperature during operation
-
Easy to use
-
ESD safe
|
 ¡¡ |
|
Page 1 | 2
| 3 | 4
| 5
|
6 |
7 |
8
|
