|
Type
|
Characteristics |
Usages |
Illustrations |
| PROMOTION-
SUNKKO
8 IN 1
TOOL KIT
|
 1 |
2
|
 3 |
 8
|
SUNKKO
8 IN 1
REPAIRING
TOOLS
KIT
|
 4 |
 7 |
 6
|
 5 |
|
|
|
SUNKKO-
902+
|
SUNKKO
902+ Display Double-Function Maintenance Kit.
Control
station-
Power
Consumption:320W
Heater:AC
24 - 50W
Heat
Air Flow Wedding Remover-
Power
Consumption:AC 220V or 110V/ 250W
Air
Pump:Diaphragm pump
Temperature
Range:
100~480℃
Temperature
Stability:
±1℃
(Empty load)
Tip
to Ground Resistance:Below 2Ω
Tip
to Ground Potential:
Below
2mV |
-Two-in-one
maintenance kit with digital thermostatic display.
-Applicable for maintenance of BGA circuit board for mobile
communication.
-Multifunction anti-static maintenance system can safely and
effectively remove soldering of flat IC
-ESD
safe and over current protection
|
 |
| |
| SUNKKO-850A |
SUNKKO
850A Anti-static Electricity Hot Blast Welding Remover.
Input
Voltage:AC 220V
Power
Consumption:270W
Pump
Type:Diaphragm pump
Air
Flow Rate:0.3 - 24L /min
Temperature
Control Range:100℃~450℃
Pump
Power:45W
Heating
Element:250W Metal Heater
Hot
Air Temperature:100℃~550℃ |
-Quick
startup. Increase temperature fast. Especially suitable for
mobile cellular phone repair,
computer
maintenance etc repairing.
-No touch PCB point soldering method to prevent the SMD
component shift or blow away.
-Changeable nozzle -ESD
safe and over current protection |
 |
| |
| SUNKKO-850C |
◆
On-Contacting soldering method without touching soldering
points can avoid the IC deviation and heat impulse.
◆
Heater is used with imported heat element. The quality and
function of nozzles and heater is same as international
famous brands.
◆
The air flow and heat temperature can be freely adjusted
greatly. It is suitable for being used on soldering and
unsoldering SMD like SOIC, CHIP, QFP, PLCC and BGA etc.
◆
Anti-static design |
SUNKKO 850C
Anti-Static Electricity Hot Blast Welding Remover:
|
model
|
SUNKKO
850C
|
|
Input
Voltage
|
AC
220V or 110V
|
|
Power
Consumption
|
270W
|
|
Air
Pump Type
|
Diaphragm
Pump
|
|
Pump
Power
|
45W
|
|
Air
Flow Rate
|
0.3-24L/min
|
|
Heat
Element
|
50W
Metal Heater
|
|
Hot
Air
|
Temperature
Range 100°C-480°C
|
|
 |
| |
|
SUNKKO-
936A |
◆
The anti-hot material heating element match advanced
technology .low power. Long life .
◆
Handle special light .Using long time don't make you feel
tired anymore .
◆
Variable and adjustable temperature controller can lock the
thermostat temperature.
◆
Temperature lock device to prevent other operating work
adjustable the temperature by herself .
◆
Divided body design make put on safety. |
SUNKKO SOLDERING STATION - Anti ESD:
|
Power
Consumption
|
60W
|
|
Output
Voltage
|
24V
AC
|
|
Heating
Element
|
Ceramic
heater
|
|
Temperature
Range
|
200~480℃
|
|
Temperature
Stability
|
±1℃
(no load)
|
|
Tip
to Ground Resistance
|
Below
2Ω
|
|
Tip
to Ground Potential
|
Below
2mV
|
|
 |
| |
|
SUNKKO-
806
|
SUNKKO
806 Desk type Electric motor Desoldering Tool.
Control
station-
Weight:2.5Kg
Vacuum
Pressure:
Max.600mmHg(11b/in2)
Desoldering
gun-
Motor
Output Power:12W
Heating
Element:70W Ceramic Heater
Fuse:2A
Weight:230g |
-Inside
with vacuum pump, easy carry, only need power supply to
begin working.
-Transparent, heat resist glass tube stored the tin that
easy to cleaning.
-High isolation, gun type design , only 230g without cable
and tube, not easy to feel tired for long time working.
-Ceramic heater, quick increase heat.
-ESD
safe and over current protection
|
 |
|
If you need other type of SUNKKO please freely contact us as well.
Page 1 |
2 | 3
| 4
| 5
|
6 |
7 |
8
|
